Conference Room · Motorised Curtains & Blinds

Motorised Curtains & Blinds for Conference Rooms in Goa

One button by the door — or on the AV panel — that dims the room, lowers the screen-side blinds and draws the curtains before the first slide appears.

A motorised curtain track fixed to the ceiling above a curtain

Window studioChange the treatment, the time and how far it is drawn.

Sheer + blackout · Midday

Treatment

Time of day

Drawn open30%

Daylight inLow

View outLow

Daytime privacyHigh

Sun and heat cutGood

Two layers on a double track: the sheer stays drawn for the day, the blackout closes over it at night. The most flexible answer for a bedroom.

In short

Motorise a conference room when it has several windows, a long glass wall or frequent presentations. Choose quiet motors, set up two or three scenes (meeting, presentation, video call), and agree the control method and wiring with your electrician and AV installer before the ceiling is closed.

What the conference room asks of motorised curtains & blinds

01Scenes, not individual blindsPresenters should press one button for 'presentation', not walk the room lowering six blinds. Scenes group the shading into the few states the room actually needs.
02Quiet motorsBlinds often move mid-meeting. Motors that hum quietly avoid interrupting the speaker or being picked up on the call.
03Integration with AVRooms with a control panel for screens, cameras and lights can include the shading, so one system runs the whole room.
04Reliability under pressureA motor that fails before a board meeting is worse than a manual blind. Good installation, sound wiring and a plan for power cuts matter more than features.

What we'd recommend

See it in the conference room

We bring samples to your home, hold them to your light and measure every opening — anywhere in North or South Goa.

Book a home visit WhatsApp

Designing the scenes

Most conference rooms need three scenes. Meeting: screen-fabric blinds down on the sunny side, curtains open, full daylight. Presentation: blackout blinds or curtains closed on the screen wall, the rest dimmed. Video call: windows behind the participants shaded, others open for even light on faces.

Each scene can be a single button on a wall keypad or a page on the AV panel. Keep manual override switches for each group too, for the times someone only wants to shade one window.

Working with the AV installer

The AV integrator and the shading installer need to agree early on the control protocol, where the control interfaces sit and who programs the scenes. Many motor systems accept dry-contact, serial or network commands that an AV system can send. Leaving this until handover often ends with two separate remotes on the table.

Wiring, motors and noise

Wired motors are best for a conference room: they never need charging and can be controlled centrally. They need power at each head rail, planned before false ceilings and wall cladding are closed. Ask for quiet-running motors and soft-start/soft-stop, which reduce noise and wear.

Battery motors are an option for retrofitting a room that is already finished, though they need charging and are less suited to integration with an AV system.

Keeping it simple for visitors

Label the keypad buttons in plain words — Meeting, Present, Video, Open — and place it by the door and near the presenter's position. Visitors should be able to use the room without a briefing.

Hotel meeting rooms and divisible halls

Many Goan hotels have meeting rooms that open into one larger space with a movable partition. Group the motors so each section can be controlled on its own when the partition is closed, and all together when it is open. Label the groups on the keypad by section, not by window number, so banqueting staff can reset the room between bookings without a call to maintenance.

In Goa

Power cuts and monsoon humidity

Power interruptions in Goa are more frequent in the monsoon. Put the shading on the same backup supply as the AV equipment, so a cut does not leave the room bright with a dark screen, or dark with no way to open the blinds.

Keep motor connections and control units inside the ceiling void, away from the glass where condensation collects, and specify sealed components for rooms near the coast.

Mistakes we see in Goan homes

Leaving shading out of the AV plan, so the room ends up with separate remotes.
Programming one 'all down' button and no scene for video calls.
Choosing battery motors for a busy boardroom where nobody owns the charging.
Forgetting backup power for the shading in a room that relies on it.

Before you order

Number of windows and length of any curtain runs.
Whether the room has an AV control system, and who installs it.
Scenes you want: meeting, presentation, video, open.
Where keypads and power points can go.
Backup power arrangements for the room.

More for the conference room

Motorised Curtains & Blinds for other spaces

We measure and fit motorised curtains & blinds across Goa — Panjim, Porvorim, Dona Paula, Mapusa, Candolim, Calangute, Assagao, Anjuna & Vagator, Siolim, Benaulim, Colva, Varca, Cavelossim, Margao, Majorda, Vasco da Gama, Canacona & Palolem, Ponda.

FAQ